F-800 High Quality Oil and Gas Field Drilling Mud Sand Pump
Features
.Structure : Power End, Fluid End, Spraying System, Lubricating System, Charging System
.F Series Mud Pumps are products as the standard of API Spec 7k, expendable parts at the fluid end are interchangeable with the parts that are in conformity with API Spec.
.Solid and compact structure, small volume, good and reliable performance, which can meet the drilling requirements such as high pump pressure and big displacements in the oil field.
.F series mud pumps have a longer stroke and can be operated at a lower stroke, thus improved the water supplying performance effectively and extended the lifetime of expendable parts at the fluid end greatly. The suction pulsation dampener has an advanced structure which is reliable to use and can make the pump realize its best suction performance.
.The power end uses combined lubricating system of forced lubrication and splash lubrication. Reliable to lubricate and extend the service life of power end.
.This series mud pumps are widely used in the oilfield and other industrial mining enterprises for well drilling and well repairing etc.
.This series mud pumps are strictly manufactured according to API Spec 7k "the Equipment Specification of Well Drilling and Repairing", and are tested accordingly when leave factory.
Technical Parameters
Features
.Structure : Power End, Fluid End, Spraying System, Lubricating System, Charging System
.F Series Mud Pumps are products as the standard of API Spec 7k, expendable parts at the fluid end are interchangeable with the parts that are in conformity with API Spec.
.Solid and compact structure, small volume, good and reliable performance, which can meet the drilling requirements such as high pump pressure and big displacements in the oil field.
.F series mud pumps have a longer stroke and can be operated at a lower stroke, thus improved the water supplying performance effectively and extended the lifetime of expendable parts at the fluid end greatly. The suction pulsation dampener has an advanced structure which is reliable to use and can make the pump realize its best suction performance.
.The power end uses combined lubricating system of forced lubrication and splash lubrication. Reliable to lubricate and extend the service life of power end.
.This series mud pumps are widely used in the oilfield and other industrial mining enterprises for well drilling and well repairing etc.
.This series mud pumps are strictly manufactured according to API Spec 7k "the Equipment Specification of Well Drilling and Repairing", and are tested accordingly when leave factory.
Technical Parameters
Model | F-500 | F-800 | F-1000 | F-1300 | F-1600 | F-2200 |
Type | Triplex Single-Acting | |||||
Rated Power (kW/HP) | 373/500 | 597/800 | 746/1000 | 969/1300 | 1193/1600 | 1640/2200 |
Strokes per minute | 165 | 150 | 140 | 120 | 120 | 105 |
Stroke Length (mm/in) | 191/7 1/2" | 229/9" | 254/10" | 305/12" | 305/12" | 356/14" |
Max. Liner Dia (mm/in) | 170/6 3/4" | 170/6 3/4" | 170/6 3/4" | 180/7" | 180/7" | 230/9" |
Gear Type | Herringbone Gear | |||||
Valve Pot | API-5# | API-6# | API-6# | API-7# | API-7# | API-8# |
Gear Ratio | 4.286:1 | 4.185:1 | 4.207:1 | 4.206:1 | 4.206:1 | 3.512:1 |
Dia of Suction Inlet (mm/in) | 203/8" | 254/10" | 305/12" | 305/12" | 305/12" | 305/12" |
Dia of Discharge Outlet | 4"flange 5000psi |
5 1/8"flange 5000psi |
5 1/8"flange 5000psi |
5 1/8"flange 5000psi |
5 1/8"flange 5000psi |
5 1/8"flange 5000psi |
Dia. of Pinion Shaft (mm/in) | 139.7(5 1/2) | 177.8(7) | 196.9(7 3/4) | 215.9(8 1/2) | 215.9(8 1/2) | 254(10) |
Max Pressure Mpa/psi | 27.2/3945 | 34.5/5000 | 34.5/5000 | 34.5/5000 | 34.5/5000 | 34.5/5000 |
Overall Dimensions (mm/in) | 3658*2709 *2231 144" *106" *88" |
3963*3025 *2410 56"*119" *95" |
4267*3167 *2580 68"*125" *102" |
4617*3260 *2600 82"*128" *102" |
4615*3276 *2688 82"*129" *106" |
6000*3465 *2745 236"*136" *108" |
Weight kg(lb) | 9770 (21540) |
14500 (31970) |
18790 (41420) |
24572 (54170) |
24791 (54660) |
38460 (84790) |